Slowly slide the Butterfly Valve into position, between the rims of the section of pipe or tube.
• Avoid damaging the gasket, as it is the seal for both the flanges and the valve.
• Locate the bolt holes.
• Match a bolt to the proper corresponding hole.
• Tighten the bolts in opposition, choosing one that is located on the opposite side.
• Do not tighten the bolts by working on them in a circle.

Check it out
• Use the lever on the outside of the valve to open it.
• Watch to see that the valve has enough space to turn within the pipe or tube.

More products of valves

Butterfly Valves

Check Valves

Plug Valves

Safety Valves

Safety Relief Valves

Balance Valves