where are the butterfly valve are used?
A butterfly valve is a type of flow control device, typically used to
regulate a fluid flowing through a section of pipe. The valve is
similar in operation to a ball valve. A flat circular plate is
positioned in the center of the pipe. The plate has a rod through it
connected to an actuator on the outside of the valve. Rotating the
actuator turns the plate either parallel or perpendicular to the flow.
Unlike a ball valve, the plate is always present within the flow,
therefore a pressure drop is always induced in the flow regardless of
valve position.
Butterfly valve
*A butterfly valve is from a family of valves called quarter-turn
valves. The “butterfly” is a metal disc mounted on a rod. When the valve
is closed, the disc is turned so that it completely blocks off the
passageway. When the valve is fully open, the disc is rotated a quarter
turn so that it allows an almost unrestricted passage of the process
fluid. The valve may also be opened incrementally to regulate flow.
*There are different kinds of butterfly valves, each adapted for different pressures and different usage. The resilient butterfly valve, which uses the flexibility of rubber, has the lowest pressure rating. The high performance butterfly valve, used in slightly higher-pressure systems, features a slight offset in the way the disc is positioned, which increases the valve’s sealing ability and decreases its tendency to wear. The valve best suited for high-pressure systems is the tricentric butterfly valve, which makes use of a metal seat, and is therefore able to withstand a greater amount of pressure.
*The butterfly valve has a body, a resilient seat, a butterfly disk, a stem, packing, a notched positioning plate, and an actuator. The resilient seat is under compression when it is mounted in the valve body, thus making a seal around the periphery of the disk and both upper and lower points where the stem passes through the seat. Packing is provided to form a positive seal around the stem for added protection in case the seal formed by the seat should become damaged. To close or open a butterfly valve, the actuator is turned only one quarter turn to rotate the disk from 0° to 90°. Actuators used on butterfly valves vary based on the application and size of the valve. A simple handle oriented in the same direction of the metal disc (to indicate valve position) is common. Some larger butterfly valves may have a handwheel that operates through a gearing arrangement to operate the valve. This method is used especially where space limitation prevents use of a long handle. Acuators may also be air driven or electrically operated when used as part of an automated control system.
